Spot On Plumbing of Tulsa Plumbers * Slab Leak Prevention and Leak detection

Water leaks can be a homeowner's worst nightmare. Not only can they cause significant damage to your property, but they can also lead to costly repairs and even health hazards. One of the most common types of leaks is a slab leak, which occurs when a pipe under the concrete foundation of your home begins to leak. In this article, we'll discuss slab leak prevention and leak detection, so you can protect your home and your wallet.

Call Spot On Plumbing of Tulsa Plumbers for 24 hour emergency plumbing needs.

Leak.jpeg

What is a Slab Leak?

A slab leak is a water leak that occurs in the pipes under the concrete foundation of your home. These pipes are typically made of copper or galvanized steel and can corrode over time, leading to cracks and leaks. Slab leaks can also occur due to shifting soil, poor installation, or damage from construction or earthquakes.

Signs of a Slab Leak

Slab leaks can be difficult to detect, but there are some signs you can look out for. These include:

  • Unexplained increase in water bill

  • Sound of running water when no faucets are on

  • Wet spots on the floor or carpet

  • Low water pressure

  • Cracks in walls or floors

  • Musty or moldy smell

If you notice any of these signs, it's important to act quickly to prevent further damage.

WhyPlumbingMaintenanceMatters-2.jpg

Slab Leak Prevention

Preventing a slab leak is much easier and less expensive than dealing with the aftermath of one. Here are some tips to help prevent slab leaks in your home.

Regular Plumbing Maintenance

One of the best ways to prevent slab leaks is to have regular plumbing maintenance. A professional plumber can inspect your pipes for any signs of wear and tear and make necessary repairs before a leak occurs. They can also check for any potential issues, such as tree roots growing into pipes or shifting soil, and address them before they become a problem.

Monitor Water Pressure

High water pressure can put unnecessary strain on your pipes, leading to leaks. It's important to monitor your water pressure and make sure it stays within a safe range. If you notice your water pressure is consistently high, consider installing a pressure regulator to protect your pipes.

Avoid Chemical Drain Cleaners

Chemical drain cleaners can be harsh on your pipes and cause corrosion, leading to leaks. Instead, opt for natural alternatives or call a professional plumber to clear any clogs.

Be Mindful of What Goes Down the Drain

Certain items, such as grease, coffee grounds, and eggshells, can clog your pipes and cause damage. Be mindful of what goes down your drains and avoid flushing anything other than toilet paper and human waste down the toilet.

Insulate Pipes

In colder climates, pipes can freeze and burst, causing leaks. Make sure to insulate any exposed pipes to prevent this from happening.

By scheduling service with our Spot On plumbers in Tulsa, we can perform necessary slab leak detection and fix any sort of water leak issue.

TULSA SLAB LEAK DETECTION

Leak Detection

If you suspect a slab leak in your home, it's important to act quickly to prevent further damage. Here are some steps you can take to detect a slab leak.

Check Your Water Meter

One of the easiest ways to check for a leak is to turn off all water sources in your home and check your water meter. If the meter is still running, it's likely that you have a leak.

Conduct a Visual Inspection

Inspect your home for any signs of a leak, such as wet spots on the floor or walls, mold or mildew, or cracks in the foundation. If you notice any of these signs, it's important to call a professional plumber for further inspection.

Use a Leak Detection Device

There are various leak detection devices available on the market that can help you locate a leak. These devices use sound or infrared technology to detect leaks and can be a useful tool in finding a slab leak.

Call a Tulsa Plumber

If you suspect a slab leak, it's best to call a Tulsa plumber. They have the expertise and equipment to accurately detect and repair slab leaks, saving you time and money in

WhyPlumbingMaintenanceMatters-4.jpg

Slab Leak Repair

If a slab leak is detected, it's important to act quickly to prevent further damage. Here are some steps a professional plumber may take to repair a slab leak.

Tunneling

In some cases, a plumber may need to tunnel under your home to access the leaking pipe. This can be a messy and time-consuming process, but it may be necessary if the leak is located in a hard-to-reach area.

Epoxy Pipe Coating

Epoxy pipe coating is a non-invasive method of repairing a slab leak. A plumber will use a special epoxy coating to line the inside of the leaking pipe, sealing any cracks or holes and preventing further leaks.

Repiping

If the damage to your pipes is extensive, a plumber may recommend repiping. This involves replacing all the pipes under your home, which can be a costly and time-consuming process.

Care for Your Residential Plumbing System Now

Slab leaks can be a homeowner's worst nightmare, but with proper prevention and detection, you can protect your home and your wallet. Regular plumbing maintenance, monitoring water pressure, and being mindful of what goes down your drains can all help prevent slab leaks. If you suspect a slab leak, it's important to act quickly and call a professional plumber for repair. By following these tips, you can keep your home safe and avoid the headache of dealing with a slab leak.

Get Your Residential Plumbing System Fixed